List of Products.

Fans and blowers

Fans and blowers for general duty
• Industrial / commercial intake-exhaust direct drive axial panel fan, low pressures, aluminum blade, model PA, available in diameters from 6" to 36"
  
• Industrial / commercial intake-exhaust direct drive axial panel fan, low pressures, reinforced plastic propeller, model PMA, diameters from 250 mm to 400 mm
  
• Industrial / commercial / agricultural and poultry belt drive axial panel fan, low noise, low pressure, high air delivery, model AIC D-99, 36" diameter aluminum propeller
  
• Low pressure direct drive axial panel fan, propeller with aerodynamic blades and hub injection molded in engineering grade glass reinforced modified polyphenylene oxide, low pressures, model D-37, available with 3, 4, 6, 9 and 12 adjustable pitch blades, diameters from 357 mm. up to 1260 mm
  
• Wall exhaust fan with low profile aluminum grille, free air, model PARE, available in 6", 8", 10" and 12" diameters
  
• Direct drive roof mount axial exhaust fan with spun aluminum hood, low pressures, aluminum blade, model HPA, available in diameters from 8" to 36"
  
• Direct drive roof mount centrifugal exhaust fan with spun aluminum hood, low pressures, model HCD, available in diameters from 8" to 22"
  
• Heavy duty belt drive roof mount centrifugal exhaust fan, compact design, aluminum housing with die-formed louvered side panels, low to medium pressures, model HCC, available in diameters from 20" to 36"
  
• Direct drive tubeaxial fan, propeller with aerodynamic blades and hub injection molded in engineering grade glass reinforced modified polyphenylene oxide, model TAX, low pressures, diameters from 357 mm to 1260 mm
  
• Direct drive vane axial fan, propeller with aerodynamic blades and hub injection molded in engineering grade glass reinforced modified polyphenylene oxide, model TAX-VAX, low pressures, diameters from 357 mm to 1260 mm
  
• Belt or direct drive vane axial fan, all steel casing and wheel with heavy formed airfoil blades, low to medium pressures, suitable for either vertical or horizontal mounting, model D-34, available in diameters from 15" to 54-1/4"
  
• In-line centrifugal duct blower, low noise, low to medium pressures, model D-40, available in diameters from 10" to 58"
  
• Forward curved single and double inlet belt drive centrifugal fans, high air delivery at low rpm and low pressures, model D-5, available in diameters from 12" to 30"
  
• Forward curved single inlet direct drive centrifugal fans, pressures up to 1" H2O and air volumes to 1400 cfm, model D-9, available in 7-1/2" and 9" diameters
  
• Backward curved belt drive airfoil centrifugal fans, single or double inlet, low to medium pressures, low rpm, high air delivery, high efficiency, models D-10/A, D-36/A and D-51/A, available in wheel diameters from 13 7/32" up to 96"
  
• 400 mm (16") high velocity air circulator (mancooler) with guards, available with mounting choice of roll-about stand or wall/ceiling bracket, model MC-400
  
• High velocity industrial air circulator (mancooler) with guards and roll-about stand, available in 710 mm and 900 mm diameters
  
• Portable dual purpose ventilation blower for fresh air circulation or removal of noxious gases, compact design easily transported, available with choice of electric or gasoline motors, attachment for 8" diameter hose. Ideal for utility companies
  

Fans and blowers for industrial duty
• Backward inclined flat bladed belt drive centrifugal fan for industrial applications, handles air containing corrosive fumes or light, erosive dust particles, single inlet, low to medium pressures, models D-10/B, D-36/B and D-51/B, wheel diameters from 12-1/4" through 78-3/4"
  
• Industrial direct drive centrifugal fan with radial blade wheel. Handles air containing dust particles at pressures up to 7.5" H2O and air volumes of 990 cfm
  
• Industrial centrifugal fan, available with choice of wool / fiber wheel, long shavings wheel or air/material wheel, temperatures up to 800 F, pressures to 40" WG and volumes to 70,000 cfm. Models D-16, D-39 and D-52, wheel diameters from 8-3/4" through 71-1/4"
  
• Industrial direct drive centrifugal fan, available with choice of wool / fiber wheel, long shavings wheel or air/material wheel, pressures to 40' WG and volumes to 70,000 cfm. Models D-52, wheel diameters from 8-3/4" through 71-1/4"
  
• Single-stage pressure blower, rugged housing, constant velocity wheel design, pressures to 59" WG and volumes to 5,000 cfm. Models D-15 and D-53 available in sizes from 8 oz. up to 32 oz.
  
• Multi-stage pressure blower, for high pressure systems, central vacuum and pneumatic conveying, pressures to 10.0 p.s.i.g; vacuums to 12" hg, volumes to 7,000 cfm. Model D-66
  

Fans and blowers for heavy duty
• Induced draft centrifugal fan, single and double inlet, radial tip wheel; handles air moderately contaminated with particles, appropriate for charcoal ovens and cement kilns. Pressures to 76" H2O, volumes to 600.000 cfm, medium efficiency. Model D-1807, available in sizes from 27" up to 108"
  
• Induced and forced draft centrifugal fans, single and double inlet, airfoil wheel; handles clean air at pressures up to 48" H2O, volumes to 650.000 cfm, high efficiency. Models D-1902, D-1903, D-1904, D-1905, D-1910 and D-1911, available in sizes from 27" to 84-7/8"
  
• Induced draft centrifugal fan, single and double inlet, radial wheel; handles air contaminated with particles, appropriate for cement kilns at pressures up to 25" H2O, volumes up to 450.000, medium efficiency. Model D-2000, available in sizes from 36-1/2" to 108"
  
• Centrifugal single and double inlet fan, radial wheel; handles clean air as primary air, for dryers, combustion, cooling, etc. At pressures up to 70" H2O, volumes to 45.000 cfm, medium to low efficiency. Model 2300, available in sizes from 36" up to 60"
  
• Induced draft centrifugal fans, single inlet, radial tip wheel; handles air moderately contaminated with particles, appropriate for charcoal ovens and cement kilns. Pressures to 85" H2O, volumes to 340.000 cfm, medium efficiency. Models D-4800, D-4806, D-4894, D-5000 and D-5400, available in sizes 36" to 60"
  
• Centrifugal single and double inlet fan, radial wheel; handles clean air as primary air, for dryers, combustion, cooling, etc. At pressures up to 66" H2O, volumes to 90.000 cfm, medium efficiency. Model 4900, available in sizes from 24" to 60"
  
• Induced draft centrifugal fans, single inlet, backward curved wheel; handles moderately contaminated air for dust collectors, fluidized beds, etc. Pressures up to 70" H2O, volumes to 680.000 cfm, high efficiency
  
• Belt or direct drive variable air volume vane axial fan, aluminum blade, pitch manually adjustable, pressure range to 20' total pressure, volume range to 300,000 cfm. Model D-47,17 sizes available from 16-1/2" to 81-1/8"
  
• Belt or direct drive automatic controllable pitch vane axial fan for maximum performance and energy saving, aluminum blade. Pressure range to 15" total pressure; volume range to 250,000 cfm. Model D-47, 13 sizes from 24-1/2" up to 81-1/8"
  
• Direct drive axial jet fans for tunnel ventilation with inlet and outlet silencers, reversible or non-reversible. Available in diameters from 630 mm to 1400 mm
  

Aluminum fan blades manufactured with zinc plated hubs
• Number of blades and pitch determined beforehand to suit OEM requirements. Available in diameters from 6" up to 60"
  

Zinc grip steel blower wheels with zinc plated hubs
• Single and double inlet single center blower wheels are manufactured in different diameters and widths to suit OEM requirements. Available in diameters from 4.7" though 30" for light and heavy duty applications.
  

Grilles and registers
• Single deflection supply grille, h or v, with or without opposed blade damper
  
• Double deflection supply grille, hv or vh, with or without opposed blade damper
  
• Single deflection supply grille, h or v, with or without parallel blade damper
  
• Multiple deflection supply register, 1, 2, 3 or 4-way flow pattern
  
• Return grille, with or without opposed blade damper
  
• Return filter grille, with or without swing out core
  
• Single deflection return grille, h or v, with or without parallel blade damper
  
• Door grille
  

Air diffusers
• Curved blade ceiling air diffuser, 1, 2,3 or 4-way flow pattern, with or without opposed blade damper
  
• Variable pattern utility square ceiling air diffuser, with or without opposed blade damper
  
• De-luxe ceiling air diffuser, square or rectangular, fixed core, with or without opposed blade damper
  
• De-luxe ceiling air diffuser, square or rectangular, fixed or snap-in/out core, with or without opposed blade damper
  
• Curvi-linear air diffuser with adjustable blades, 1 or 2-way flow pattern, with or without opposed blade damper
  
• V-line linear air diffuser, 1 or 2-way flow pattern, with or without opposed blade damper
  
• Air slot linear diffuser with or without concealed mounting
  
• Wall, ceiling or floor air diffuser
  

Louvers
• Outside air louvers
  

Products manufactured with our own designs and from

Dirección: Kilómetro 5, Carretera Caracas-Santa Lucía, Sector El Limoncito. Caracas 1070. Venezuela. Tlf: (582) 291.22.21 thru 25. Fax: (582) 291.26.76

e-mail: metalair@trade-venezuela.com